defr Glossar

The readings shown by turbidimeters are not scaled in the measured light intensity, but as a concentration of a reference suspension. Because the accuracy of this calibration solution determines the reliability of subsequent turbidity measurements, it is of crucial importance.

The internationally established turbidity standard for calibration is formazine. This standard can be reproduced at any time with the recipe taken from standard ISO 7027 (Water quality - Determination of turbidity):

3.2 Reagents

All reagents shall be of recognized analytical grade. All reagents should be stored in hard glass bottles.

3.2.1. Water, for the preparation of standard matching solutions

  • Soak a 0.1 µm membrane filter (of the type used for bacteriological studies)
  • for 1 h in 100 ml of distilled water.
  • Filter 250 ml of distilled water through it and discard the water.
  • Then pass a 500 ml volume of distilled water twice through the membrane and reserve this water for the preparation of standard solutions.

3.2.2 Formazine (C2H4N2) solution

  • Formazine is not available commercially and it shall, therefore, be prepared as follows.
  • Dissolve 10.0g of hexamethylenetetramine (C6H12N4) in Water (3.2.1) and dilute to 100 ml. (Solution A).
  • Dissolve 1.0g of hydrazine sulphate (N2H6SO4) in water (3.2.1) and dilute to 100 ml. (Solution B).

WARNING: Hydrazine sulphate is poisonous and may be carcinogenic.

  • Mix 5 ml of solution A with 5 ml of solution B.
  • Leave for 24 h at 25±3°C. Then dilute the solution to 100 ml with the water (3.2.1).
  • The turbidity of this stock solution in formazine attenuation units (FAU) or formazine nephelometric units (FNU) is 400.
  • This solution is stable for about 4 weeks if stored at a temperature of 25±3°C in the dark.

3.2.3 Formazine, standard matching solutions

Dilute the stock solution (3.2.2) with water (3.2.1) using pipettes and volumetric flasks to obtain standard matching solutions of turbidities in the range of interest. These solutions are only stable for 1 week.

It is extremely important to observe the prescribed preparation temperature, because it affects the particle size of the formazine particles perceptibly. The following Figure illustrates this. Errors caused by temperature variations are on the order of 1..2% K-1. Consequently, SIGRIST keeps the preparation temperature constant to within ± 1°C..

Particle size distributions of formazine at various preparation temperatures. Fig. 19: Particle size distributions of formazine at various preparation temperatures.

Index

Contact distribution partner

{{selectedCountry.Name}} {{country.Name}}

Please select your businessarea

{{ba.Name}}

Please select

{{area.Name}}

Please select your businessarea

{{ba.Name}}
{{selectedCountry.Name}} {{country.Name}}
{{vm.getBusinessAreaStringByVendor(vendor)}} {{area.Name}}
{{vm.getBusinessAreaStringByVendor(vendor)}}
Leonardo Pio
Responsible for the application: Water, Industrial Processes, Beverages & Food for the regions: AG, LU, NW, OW, VS, BS, BL, SO, BE, FR, NE, VD, GE and JU
Andreas Corradini
Responsible for the application: Water, Industrial Processes, Beverages & Food for the regions: TI, GR, UR, GL, SZ, ZG, ZH, SH, SG, TG, AR and AI Traffic & Environment: whole Switzerland
Ihr Businesspartner für Getränke & Lebensmittel:
Für Wasser, Industrielle Prozesse, Verkehr & Umwelt kontaktieren Sie unseren Hauptsitz.

Your distribution partner for beverages & food:
For water, industrial processes, traffic & environment please contact our headquarters

Ihr Businesspartner für Getränke & Lebensmittel:
Für Wasser, Industrielle Prozesse, Verkehr & Umwelt kontaktieren Sie unseren Hauptsitz.

Your distribution partner for beverages & food:
For water, industrial processes, traffic & environment please contact our headquarters

Contact headquarters

Felix Joller
Sales Manager ScrubberGuard
Öffnungszeiten:
Montag–Freitag 08:00–12:00 und 13:30–17:00
Feiertage & Betriebsferien:
Seppitag: 19. März 2024, Ostern: 29. März – 01. April 2024, Auffahrt: 09. Mai 2024, Pfingstmontag: 20. Mai 2024, Fronleichnam: 30. Mai 2024, Bundesfeiertag: 01. August 2024, Maria Himmelfahrt: 15. August 2024, Allerheiligen: 01. November 2024, Maria Empfängnis: 08. Dezember 2024, Betriebsferien: 24. Dezember 2024 – 02. Januar 2025
Opening hours:
Monday–Friday 08:00am–12:00pm und 1:30pm–5:00pm
Public & company holidays:
St Joseph's Day: 19. March 2024, Easter: 29. March – 01. April 2024, Ascension Day: 09. May 2024, Whit Monday: 20. May 2024, Corpus Christi: 30. May 2024, Federal Holiday: 01. August 2024, Assumption Day: 15. August 2024, All Saints Day: 01. November 2024, Conception of Mary: 08. December 2024, Company holidays: 24. December 2024 – 02. January 2025